PT200X Digital Indicator - Harsh Conditions Weighing Indicator - PT200X

EP200XI0020XXX - 12V Recharge Pack (NiMH)

Large c7e9d4e9b6

The display for harsh environmental conditions

The PT200X is all about industrial protection in harsh environments, based on the PT200 display series which has been an acknowledged leader in weight displays for many years, the PT200X provides unparalleled protection.

Rated IP69k the highest environmental protection rating and constructed of an impact resistant plastic which will withstand high pressure water jets (1450psi) at high temperature (up to 80c) from multiple angles.

Using double O rings to seal the clam shell design the PT200X incorporates a continuous single front panel which protects the display and avoids leaks. Capacitive keyboard (no moving parts) means no membrane to fail, waterproof glands and connectors seal the cable entry. And when you need to test or calibrate you don’t even need to enter the housing, all you do is use the capacitive keyboard or place the optional magnetic PT OPTO-LINK onto the external display surface allowing for PC connection to upload or download configuration files. A “FLASH�? rom allows for updating of software in the field.

Three models are offered,

Standard power input of 12 to 24VCD, 9.6, 12 and 24V batteries (2.5 VA max)- ON/OFF key with memory feature.

AC Power supply: 110/240VAC 50/60Hz

12V Battery pack (rechargeable NiMH)

The exceptional environmental protection designed into the PT200X is ideal for food processing, Automotive, Chemical, Pharmaceuticals and similar maximum protection industries.

FEATURES
  • Parts Counting
  • Unit switching
  • Manual hold, peak hold
  • Live weight and totalising
  • Check weighing – low, pass, high (3 colour status high intensity LEDs)
  • Configurable print format
  • RS232 as standard
  • Assignable Function Key, 3 Outputs
  • 1/30000 display resolution, (1/8,388,608 internal resolution)
  • Ten point linearity correction
  • Mains operation, Battery option
  • ON/OFF key with memory feature


ModelPT200X PT200XPT200X
Order CodeEP200XI0000XXXEP200XI0010XXXEP200XI0020XXX
ResolutionUp to 30,000 divisions, minimum of 0.25µV/division, 20 updates/second
Zero Cancellation±2.0mV/V
Span Adjustment0.1mV/V to 3.0mV/V full scale
Excitation5V for up to 4 x 350 ohm or 8 x 700 ohm load cells (4 wire or 6 wire + shield)
A/D Type24 bit Sigma Delta with 8,388,608 internal counts
Operating EnvironmentTemperature: -10 to +50°C ambient, Humidity: 100%, Rating: IP68 and IP69K
DisplayLED Back LCD with six 20mm high digits with units and annunciators
Setup and CalibrationFull digital with visual prompting in plain messages
Digital FilterSliding window average from 0.1 to 4.0 seconds
Zero RangeAdjustable from ±2% to ±20% of full capacity
Power Supply12 to 24VDC, 9.6, 12 and 24V batteries (2.5 VA max)AC power supply: 110/240VAC, integral cable with appropriate plug for locality of order12V battery pack (rechargeable NiMH) with external charger with 2m cable, waterproof connector and plugs for EU, UK, US and AU
Communications.opto-LINK Data Coupling magnetically coupled infra-red communications
Conversion cables available for RS-232 or USB
CorrectionTen point linearity correction
Serial OutputsRS-232 automatic transmit, network or printer outputs
Transmission rate: 2400, 4800 or 9600 baud
Assignable Function Key1
Input/Output1 Remote Input - shared with comms port
3 Outputs - isolated transistor drive outputs (400mA total at 50VDC)
Time keepingBattery backed clock/calander, battery life 10 years minimum
FunctionsUnit switching, counting, manual hold, peak hold, live weight and totalising
Check weighing – low, pass, high (3 colour status high intensity LEDs)
Configurable print format
Setpoints3
Case MaterialsPC + Polyester alloy, PBT, Silicon rubber, SS304 stand
Packing WeightsBasic indicator: 2kg
Optional MountingsStainless steel bracket.
Wide and suitable for free standing desk mount or screwed to indicator stand or wall.
Stainless steel bracket.
Narrow and suitable for screwing to indicator stand, wall or desk
Pole insert, suitable to fit to the narrow bracket and allow mounting to a tube with 36mm ID.

Accessories for this item

Tiny 0fc106362c PT200X BRACKET (WIDE)
EO200XIDESKMNT - For desk/wall mount
Tiny bba3eb5373 INSERT FOR POLE MOUNT
EO200XIPOLEINS - Narrow desk/wall mnt only
Tiny d963076620 PT200X BRACKET (NARROW)
EO200XIPOLEMNT - For pole/wall/desk mount
Tiny Opto-link Data Cable DB9
EP200ROPTOLINK - Used on PT200/PT600R/200X
Tiny Opto-link Data Cable USB
EP200ROPTOLUSB - Used on PT200/PT600R/200X

Popular related products

Tiny 036d470e16 PT200MB Panel Mount
EP200MB0000XXX - RS-232C, RS-485, Modbus
Tiny 3a7cc0bb33 RD5 57mm Remote Display
EPRD5100000XXX - Seven Segment Bright LED
Tiny RS232C POS Printer
EPPOSPRINT - For electronic instrument