PT200P Digital Indicator

PT200P Multi-Function Stainless Steel Housed Indicator
Internal AC Power Supply: 110/240VAC 50/60Hz input

The PT200P is an IP65 indicator suitable for use in dusty and wet environments with the robust housing fabricated from 2mm thick stainless steel.

The very latest design indicator with many built-in functions allowing it to be used for almost any weighing application, including: Counting, Hold&Peak Hold and High/Low Level Control.

The PT200P utilizes the powerful Sigma~Delta A/D Converter and 4 layer surface mount technology and has a RS-232 serial output for printing, continuous output or basic network polling. There are two transistor drive outputs available for setpoints or High/Low Level Control uses.

The 20mm LCD display has LED backlighting for easy viewing in all lighting conditions. All cable connections are via special spring-locking push terminals for ease of installation (no soldering required) and permanence.

There is an OPTO-LINK infra-red port designed into the display for PC access to all setup and calibration functions.

Related Documents

• 
  PT 200 Series Brochure

  Product Brochure and Specifications

• 
  PT200P Quickstart Manual

  Manual for setup and installation of PT200P indicator with software before V3. The PT200 version is displayed first at power on.

• 
  PT200P Quickstart Manual Version 2

  Manual for setup and installation of PT200P indicator with software V3 and above. The PT200 version is displayed first at power on. Refer also API 17.582 Manual Addendum for PT200M/P V3.93.

• 
  PT200P Operator Manual

  Manual for general operation of PT200P indicator with software before V3. The PT200 version is displayed first at power on.

• 
  PT200P Operator Manual Version 2

  Manual for general operation of PT200P indicator with software V3 and above. The PT200 version is displayed first at power on. Refer also API 17.582 Manual Addendum for PT200M/P V3.93.

• 
  PT200P Reference Manual

  Reference manual for PT200P indicator with software before V3. The PT200 version is displayed first at power on.

• 
  PT200P Reference Manual Version 2

  Reference manual for PT200P indicator with software V3 and above. The PT200 version is displayed first at power on. Refer also API 17.582 Manual Addendum for PT200M/P V3.93.

• 
  EC Approval T6244

  EC Type Approval Certificate T6244 Rev.4 for PT200M Indicator

• 
  NZ Approval 1794.0

  New Zealand Approval for PT200 series indicators.

• program-VIEWER

  Free software to remotely configure and display weights on a Windows PC from the PT200R, PT200M and PT200P indicators with software before V3. The PT200 version is displayed first at power on.

• program-VIEWER200V224

  Free software to remotely configure and display weights on a Windows PC from the PT200R, PT200M and PT200P indicators with V3 and above software. The PT200 version is displayed first at power on. For Windows 7, 32 and 64 bit, and later.

• 
  PT200 Communications Manual

  Communications manual for PT200R/M/P series indicators.

• 
  API13.661 PT200M.P Network Setup

  Simple setup of PT200M/P for serial communications

• 
  API17.583 V4 Revisions for PT200M/P/X Manual

  Revisions for PT200M, PT200P, PT200X Manual for version 4 software.